ISMC introduced multi-axis micro servo system
With the development of electronic manufacturing, semiconductor, robotics, and other industries in recent years, the complexity of equipment has become increasingly high, and the number of servo drive shafts required has gradually increased. However, traditional servo drive shafts and shafts have more cable coupling, including communication cables, power cables, power cables, encoder cables, power cables, digital signal cables, analog signal cables, STO cables, and so on, Complex cables make the device extremely bulky. The large number of cables not only brings about reliability issues for equipment, increases maintenance costs, but also increases the total cost of the system. Especially for small and precise equipment, due to space constraints and the need for high reliability, there is a higher demand for highly integrated servo drives.
The multi axis micro servo system adopts a new generation of servo technology. In addition to having a power density that is more than ten times larger than traditional multi axis AC servo, a size that is only one tenth of that of traditional AC servo, and a bandwidth that is more than twice that of traditional AC servo, it further integrates the internal communication cables, power cables, power supply cables, digital signal cables, analog signal cables STO cables realize common interconnection. All shafts share a common network cable, a common power cable, a common digital signal, a common analog signal, and a common STO signal. One power cable realizes the energy input of all shafts, and one network cable realizes the control and sensing of all motors, all digital signals, and all analog signals. The types of motors can be found in rotary servo motors, voice coil motors, linear motors, torque motors (DD motors) Any combination of brushless motor, brushless motor, hollow cup motor, frameless motor, and reduction motor.
Compared to traditional servo systems, this multi axis micro servo system not only greatly improves performance and saves size, but also can be installed close to the motor, and can perform power and network networking on the motion mechanism. It also eliminates the interconnecting cables between multiple servo drivers to the greatest extent, and can achieve control and sensing of all motors, digital signals, and analog signals using only one network cable, Not only has the total system cost and maintenance cost been greatly reduced, but also the reliability of the equipment has been improved to the maximum extent, and the miniaturization and highly integrated characteristics of the equipment have been brought into full play.
"We adhere to the concept of bringing servo drives closer to the motor and achieving motion control on the motion mechanism. At the same time, our products support the control and sensing of accessories around the motor, such as solenoid valves, pressure sensors, second encoders, and band brakes. A single network cable can achieve control and sensing of all motion control terminal components. By improving integration, we improve the reliability, safety, and ease of use of the device, and reduce the system size of the device "The total cost, especially for small and precise equipment in electronic manufacturing, semiconductor, robotics, and other industries, such as SMT equipment, 3-5 kg small six-axis robots, Scara robots, Delta robots, and so on."
The Ruby series of multi axis micro servo controllers released by ISMC is an industry-leading multi axis micro servo controller product that integrates all the functions of multiple servo drivers in a minimal space, achieving world-class performance. It is fully developed in accordance with the European R&D management process V model, meeting European IEC61800 standards, passing CE certification, and possessing European product quality.
Its main product features include:
1) Multi axis high integration: one product integrates multiple servo drivers, sharing power supply, network cable, STO, digital signal, and analog signal;
2) High power density: The size of the 6-axis drive is only 25cm * 10cm * 2.8cm, and the rated power of each single shaft is 0-400w.
3) Ultra fast response: current loop bandwidth 4500Hz, speed loop bandwidth 1500Hz.
4) Precision force control: up to 0.01 A high-precision current control.
5) Strong master control adaptation: supports EtherCAT, CANopen, and Modbus communication;
Support the CIA402 protocol; It can be adapted to mainstream controllers in the industry such as Beifu, Omron, ACS, and domestic manufacturers.
6) Suitable for various motor types: supporting rotary servo motors, voice coil motors, linear motors, torque motors, DD motors, brushless motors, brushless motors, hollow cup motors, frameless motors, speed reduction motors, etc; Each axis motor type can be randomly selected.
7) Multiple encoder adaptations: Support incremental, absolute, and Hall encoder functions, and will soon cover almost all absolute value protocols in the industry.
8) Ultra high European quality: Meet the V model R&D management process, and pass the international standards of IEC61800 and ISO9001.
9) Low power consumption: efficiency is close to 99%.
10) High usability: Full Chinese debugging interface, convenient configuration, and simple debugging.
"To provide high-quality customized research and development services to meet the needs of high-end domestic customers."
"For high-end equipment, the universal functions of servo drives are far from meeting customer needs. In addition to the high-end requirements of miniaturization, integration, high performance, and high reliability of the product, the core process of high-end equipment and servo drives are deeply coupled. It can be said that without the in-depth research and development participation of servo drive manufacturers, the core process performance of the equipment is difficult to achieve perfectly.".
Zhang Longfei, head of ISMC China, said, "We found that some customers are facing the dilemma of foreign manufacturers not providing customized R&D services, while domestic manufacturers cannot meet the demand for high-end products. They blindly entered the servo drive circuit without solving their own pain points, and ultimately did not achieve good results, which also affected the marketization process of their own products. In the face of this industry pain point, we are willing to provide European level customized R&D services for high-end products, with deep participation "The process of technological research and development for high-end customers, growing together with customers."
